Tip on Tuesday November 17
How I hung my picture straight
First I hung the cardboard lined up the corner to get it straight. Then I put in nails to mark my holes.I pulled them out and used those nifty fish hook hangers. I got them at Walmart . . .
These were 9.99. I used the small one.
And bingo . . .
Hung straight. A little high but was too tired to redo. Maybe after Christmas.
I moved the couch today.
Moved my recliner and table.
I moved the trunk I am now using as a coffee table.
And here is one more Tip . . .
Interesting I google 1960's toilet. Mine may not be from 60's but that is my floor for sure.
My tile us white several kinds and shades of white.
So did you know?
Gallons Per Flush (GPF) by Era and Type
- Pre-1982 Toilets: Use 5 to 7 gallons per flush (and older models can exceed 8 gallons).
- 1982–1992 Toilets: Use about 3.5 to 5 gallons per flush.
- Standard Modern Toilets (1993–present): Use 1.6 gallons per flush, which is the federal maximum mandated in the U.S.
- WaterSense Labeled High-Efficiency Toilets: Use 1.28 gallons or less per flush.
- Dual-Flush Toilets: Use 0.8 to 1.1 gallons for a liquid (light) flush and 1.28 to 1.6 gallons for a solid (full) flush.
You can check your toilet's specific rating or manufacturing date stamped on the back wall of the tank, behind the seat, or on the underside of the tank lid. To learn more about high-efficiency options and potential utility rebates, visit the US EPA WaterSense program page.
And do you know how much water us wasted when you wait for it to get hot?
I can fill 2 1/2 gallons sometimes 3. Guess where that water goes?
I use it to water my plants.
I also use a dish tub and collect the water when I am done.
I use it to flush my toilet.
I know some people might think that is gross. But anything I can do to lower my bills and not waste water.
So that's it for today.
Come back tomorrow for
Wordless Wednesday and
White Wednesday.











Comments
Post a Comment